| Power supply |
DC 12 V (when using an external power supply)
AC 240 V, 50 Hz/60 Hz (when connecting to an AK-UCU600PJ/AK-UCU600EJ/AK-UCU600PSJ/AK-UCU600ESJ) |
| Power consumption |
119 W (maximum for the camera only, when connecting
to an external 12 V) 360 W (when connecting to an AKUCU600PJ/
AK-UCU600EJ/AK-UCU600PSJ/AK-UCU600ESJ) |
| Operating temperature |
-10 °C to 45 °C (14°F to 113°F)
(Preheating required under a temperature 0 °C (32 °F) or below) |
| Storage Temperature |
-20 °C to 60 °C (-4°F to 140°F) |
| Operating humidity |
85% or less (relative humidity) |
| Weight |
Approx. 4.5 kg (9.90 lb) (body only) |
| Dimensions (W x H x D) |
Body only 151 mm x 267 mm x 371.5 mm
(5-31/32 inches x 10-17/32 inches x 14-21/32 inches) (excluding protrusions) |
| Pickup device |
11.14 million pixels, MOS x 1 |
| Optical Filter |
CC: 3200 K, 4300 K, 6300 K, Cross, Diffusion
ND: CAP, Clear, 1/4, 1/16, 1/64 |
| Lens Mount |
2/3-type bayonet |
| Sensitivity |
Two shooting modes
[HIGH SENS]: F10 (59.94 Hz)/F11 (50 Hz)
[NORMAL]: F6 (59.94 Hz)/F7 (50 Hz)
2000 lx, 3200 K, when white reflectivity is 89.9% |
| Horizontal Resolution |
4K: 2000 TV lines or above (center)
AK-UCU600PJ/AK-UCU600EJ/AK-UCU600PSJ/
AK-UCU600ESJ output
HD: 1000 TV lines or above (center) |
| S/N |
62 dB or above |
| Horizontal Modulation |
50% or above (27.5 MHz) |
| Gain switching |
[NORMAL]: ?6, ?3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36
[HIGH SENS]: ?6, ?3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36 |
| Shutter Speed |
・[59.94i]/[59.94p] mode: 1/100, 1/120, 1/125, 1/250,1/500, 1/1000, 1/1500, 1/2000
・[29.97p] mode: 1/48, 1/50, 1/60, 1/96, 1/100,1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
・[23.98p] mode: 1/48, 1/50, 1/60, 1/96, 1/100,1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
・[50i]/[50p] mode: 1/60, 1/100, 1/125, 1/250, 1/500,1/1000, 1/1500, 1/2000
・[25p] mode: 1/48, 1/50, 1/60, 1/96, 1/100, 1/125,1/250, 1/500, 1/1000, 1/1500, 1/2000 |
| <HD SDI1> terminal |
BNC x 1
HD (3G/1.5G): 0.8 V [p-p], 75 Ω |
| <HD SDI2> terminal |
BNC x 1
HD (3G/1.5G): 0.8 V [p-p], 75 Ω |
| <AUX> terminal |
BNC x 1
Functions as
terminal/ terminal by switching the setting in the menu
: 1.5G-SDI: 0.8 V [p-p], 75Ω
: VBS signal 1 V [p-p], 75 Ω |
| <G/L IN/PROMPTER OUT> terminal |
BNC x 1
: Tri-level SYNC or BB (black burst)
: VBS signal 1 V [p-p], 75 Ω
Functions as when standalone, and as when connecting to an
AK-UCU600PJ/AK-UCU600EJ/AK-UCU600PSJ/AK-UCU600ESJ |
| <MIC 1> terminal |
XLR x 1, 3-pin (female)
// switchable For ,/ switchable
: 0 dBu, +4 dBu menu selection available
: -60 dBu, -40 dBu, or -20 dBu menu can be selected |
| <MIC 2> terminal |
XLR x 1, 3-pin (female)
// switchable
: 0 dBu, +4 dBu menu selection available
: -60 dBu, -40 dBu, or -20 dBu menu can be selected |
| <MIC> terminal (front) |
XLR x 1, 3-pin
Switchable with terminal |
| <INTERCOM1> terminal |
XLR x 1, 5-pin (female) |
| <INTERCOM2> terminal |
XLR x 1, 5-pin (female) |
| <EARPHONE> terminal |
Stereo mini jack x 1 |
| <OPT FIBER> terminal |
Optical composite connector x 1, Tajimi/LEMO |
| <LENS> terminal |
12-pin x 1 |
| <VF> terminal |
20-pin x 1 |
| <VF> terminal (rear) |
29-pin x 1 |
| <DC IN> terminal |
XLR x 1, 4-pin, DC 12 V |
| <DC OUT 12 V 1 A> terminal |
4-pin x 1 |
| <RET CTRL> terminal |
6-pin x 1 |
| <EXT I/O> terminal |
20-pin x 1, DC 12 V, 0.5 A |
| <REMOTE> terminal |
10-pin x 1 |
| <TRUNK> terminal |
12-pin x |
| <DC OUT> terminal |
2-pin x 1, DC 12 V 2.5 A |
| <LAN> terminal |
RJ-45 x 1 |
| <USB2.0> terminal (host) |
Type A connector, DC 5 V, 0.5 A |
| Build-up terminal |
20-pin x 1 |
